Moderustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces

Patent Ownership and disclaimer

Lantern VortexED (moderustic.com)

Investors Page Information

Some of Ed's project cars For Sale

Still More Fireplace Pictures..

The pictures are of our Multi Mix.

This comes from our display that customers mix colors and at the end of each week we end up with about 200 lbs of this unique product. If you want to see more red, just add a pound or so to the top and there you have it. These are the samples you also see in Customer Color Creations, just now it is in 60 lb containers. We just started now posting this product and each container is different.

multi mix 1

multi mix 2

multi mix 3

This next self install is a 10 picture install with :

Azurlite, Clear, Blue Green, Blue Green Reflective, Ice Clear, Ice Blue. Very nice fireplace.

si 1

si 2

si 3

si 4

si 5

si 6

si 7

si 8

si 9

si 10

The custom fireplace below has a star burner and a very nice star opening

star 8

star 10

star 11

star 9

From the start......

star 1

star 2

star 3

star 4

star 5

to the finish

star 6

star 7

Very modern. The fireplace above has Gray, Gray Reflective, Black, and Black Reflective

The pictures below are of a self install fire pit with crushed lava rock and a clear base

1/2" to 3/4" lava rock is use just to the bottom of the ring.

fp 1

If you want a higher center then pour a little more filler on top of the ring.

fp 2

Now we will pour the crushed lava rock (1/4" to 3/8") over the filler as this will stop the glass from falling through the lava rock.

fp 3

fp 4

Finish shaping and pour the glass

fp 5

This is a 36" fire pit which requires 56 lbs for a 1" cover and 80 lbs for a 1 1/2" cover.

We used the 1" method, 56 lbs which as you can see works just fine and no you can't see though the glass.

fp 6

The second step will be to add color and toppers which we should post in a few days and night time pictures with the fire on

fp 7

Here we are showing you how to properly install a fire pit with glass whether you are using a 1”, 1½” or even the 2” method. The less glass over the crushed lava rock the more likely someone can disturb the top layer and then the lava rock could show through. We recommend starting with less and then you can always add more if you need to. As you can see we had our customer do the 1” method and it looks just fine. Now he is going to add toppers for accents and color. Don't be fooled by someone trying to get you to purchase more than you actually need. Give us a call and we can help guide you in the right direction. Anyone trying to get you to use more glass is just trying to get into your pockets!

The fire pit below has a Clear base with Azurlite and Ford Blue on top. Then it was topped with Dark Red Orange Topper, Yellow Amber Topper and Amber Topping.

mast 1

mast 2

mast 3

Fire Balls can be seen:

Click Here!

fire balls

A simple fire pit with Azurlite below

azurlite

The cool kitchen fireplace below has Starfire and looks really nice in the kitchen. The burner was too close to the back wall and sooted the wall up. Be sure to not let the flames hit the walls as this will cause soot.

kit 1

kit 2

kit 3

kit 4

This fire pit has Clear, Chunky Clear, Starfire and 1/2 Starfire and a water fall going into the fire, pretty cool!

fire waterfall before

fw 3

fw 2

fw 1

The fire pit below was a traditional lava rock fire pit

Now filled with lava rock (crushed 1/4" 3/8") over 3/8" 1/2" crushed. Remember the larger is under the smaller to keep the glass from falling through.

Above a flex line was installed to raise the ring to the surface. You don't want to leave the ring at the bottom unless you want an explosion or if you want to get rid of the significant other.

Below

Pour more crushed lava to make the desired shape of the fire pit and test burn for flame pattern.

Starfire base and a few other colors were added

Azurlite, Scarlet Topper, Red Topping, Ice, Copper Blue Topper, Copper Blue is a chameleon as when it gets hot it turns green and when it cools it turns back to blue!

Patterns, can you do better?

Pretty creative!

Great job and very creative.

The fireplace below has a Starfire base and several Toppers for color:

Pink, Cobalt Blue, Fuchsia, Hyacinth, Amethyst, Pale Cobalt Blue, Aquamarine, Lilac, Steel Blue and Purple.

Now we added a surround to finish it off. If you look on the lower right there is a remote control which is hidden by the surround.

r10

r11 r12

r13 r14

r15

The 4 pictures are of Multi mix in a simple but nice fire pit. Multi mix is off of our test table in the showroom which everyone who comes in can sample mix their fireplace glass and after the table fills up we then have Multi Mix. There is usually a lot of Toppers and Toppings in the Multi Mix.

mm 1

mm 2

mm 3

mm 4

The fireplace below has Starfire and Ice. This is a complete makeover and turned out very nice.

rocks 3

rocks 1

rocks 2

rocks 4

rocks 5

The fire pit below is in Boise! It has

Evergreen and Reflective

Azurlite and Reflective

Ford Blue and Reflective. Looks great.

boise 1

boise 2

boise 3

boise 4

Makes me want to go to Boise!

The fireplace below has Starfire, Rhubarb Topper, Gold and Green Pyrite.

dave 2

dave 3

dave 4

dave 5

dave 6 dave 7

dave 8

dave 9

dave 10

dave 11

dave 1

The fire table below has 1/2 Chunky Clear, Amber and Pink Rosa.

fp 001

fp 002

fp 003

fp 004

fp 005

The fire table below was created in Las Vegas by one of our dealers with a water feature surrounding the center fire.

water 1

Boise International Airport

Fire Water feature in the lobby/ food court

boise 1 This fire pit featured Starfire surrounded by water. We only did the glass and the burners were by another company.

Three Public Art Projects Selected for Boise Airport

BoiseCity Council has approved the selected artists to design and build an art glass fireplace with Aquatic Glassel, a cast and fused glass wall feature, and a fabric mural for the new buildings of the Boise Airport. Art projects will complement the modern, curvilinear architecture inspired by Idahos natural resources.

Project: Fireplace/Water Feature Artists:Lawrence Ko and Ray Ahlgren from Portland, Oregon and Moderustic of Rancho Cucamonga, California

Budget: $155,000 Site: Food Court in New Terminal Completion: September 2004

Sponsored by:Boises Percent-for-Art, Aviation and Public Transportation Department

A fireplace made of glass (Aquatic Glassel) with a surrounding water basin feature inspired by the stepped landforms of the Boise Riverbanks and nearby reservoir will act as a beacon of light within the new food court area. Sited below a skylight, the fireplace will be a focal point and gathering space for travelers.

The fireplace below is in Georgia and we will explain as we move down

The first 2 pictures are of how it used to look, nice logs! I don't think so!

The owners of this fireplace called and told us they couldn't use the fireplace because of the soot (carbon-monoxide) (poison) So we redesigned the fireplace with an air vented pan and our glass (Starfire and Ice) and now a clean burn! The flames are all above the glass and therefore no more carbon-monoxide. Fireplace Shops and dealers won't tell you about this unless you ask, how would you know to ask?

Starfire and Ice on the left

Pan and ring burner on the right.

Really nice fireplace in the middle of the great room surrounded by 3 glass walls.

The fireplace below has Starfire, Ice and Copper Ruby Red.

The fireplace below has Clear, Gray, Black Clear Pyrite and Topped with 1/2" Starfire.

The fireplace below has Starfire and Ice

The fireplace below has: Bronze and Reflective, Black and Reflective and Amber

The fire pit below has a Clear base with 1/4" Starfire and 1/2" Starfire, Yellow Amber Topper. Cobalt Blue Topper and Emerald Green Topper and a little bit of ICE. The earth as the back yard and a lot of friends, wow!

The fireplace below has a base of Black and Black Reflective with Fire Stones on top.

The fireplace below has Black, Black Reflective and ICE on top

The fireplace below has Gray and Gray Reflective

The fireplace below has Starfire and a clean simple look

The pictures below are of a self install with:

1/4" and 1/2" Bronze, 1/4" and 1/2" Starfire

Red Topper

Red Topping and about 1 lb of Scarlet Red Topper.

The fireplace below has Bronze and Bronze Reflective installed.

The fire table below has a propane burner and is not configured correctly. That is why you will see soot (carbon monoxide) the black stuff on the glass. If you purchased a table from one of these clowns that have you connect a propane tank to a burner ring, you will have problems. We use all the proper safety valves and air mixers to insure a clean and safe burn. See our propane page. We are the only company manufacturing a propane burner that is safe and built correctly for these fire tables when you are using our glass. The glass used was Starfire and Pale Blue Topper. Since and after the install we did supply the correct burner and it is burning clean as it should be.

As you can see after burning for about 10 minutes the soot is and will be an issue. Carbon monoxide IS NOT GOOD FOR YOU!

Cool Flames

On this page we will be posting some real cool fire flame pictures. Your more than welcome to send yours.

This fireplace has:

A Black Silicone base

1/2" Gray

Bronze

Bronze Reflective

1/2" Bronze

But you can't see that now. We will be posting daytime pictures so you can see the actual glass. We will be posting the yellow flames as well. We will tell you how to do this in the near future, really!

Comments and testimonial's by the customer:

Here are the other shots you requested. I tried many angles, lights, etc., yet could not get an accurate picture of the natural light setting. The silicone carbide is so reflective that it goes to light grey in all of the shots, and the smoke glass looks pale green/blue where in reality it looks almost black.

Another description that may be even more appropriate of the daytime look is that of a neatly piled burned out fire, except that all of the “ash” is reflective and sparkly.

Can not explain why in some of the shots the flame appears greenish. The blue colored flames are not exactly right either. The real color is closer to ultraviolet than anything else.

Several of the shots, including 01, 29, and 50, have been taken from the same location. You can tell the ones taken at full open valve by the increased amount of color in the shots.

Additional photos in separate mailings

Keary

I am very happy with my “new” gas fireplace. I thought I would share with you the enclosed photos taken with an ordinary digital camera with no ambient light except the fire itself. The camera was placed in various locations around the fire on the hearth proper. Unfortunately the stills cannot depict the fire action. What is amazing about the fire is the low spread out blue flame pattern instead of the conventional tall yellow flames in the middle.

The fireplace is open on three sides 30”x40”, The pit was filled with coarse bagged lava rock form Home Depot approximately 1” deep to the bottom of the U shaped burner gas pipe with the holes pointing down. It was then topped with Moderustic fine lava rock to fill in the voids on the top leaving the bottom of the burner only slightly submerged below the layer of the finer lava rock from Moderustic..

The next layer was black sand followed by S----- C-----. The sand was mounded in the center over the burners. A sprinkling of grey glass over the SC and a topper of Bronze ½” glass was sprinkled over the smaller sized matrix to finish. The final product is very dark and reflective with tiny reflections off of the s----- c------ and larger reflections off of the gradated glass during the day and in ambient light. It looks a little like a lava field that you might run across in the Mojave Desert near Barstow. Not at all showy, yet very subtle to the view in daylight.

The coarse lava rock on the bottom layer, with the finer layer on top to keep the gas in longer, acts as manifold carrying gas to all portion of the firebox floor covered with that material. I stopped the coarse rock short of the metal posts in a semi circular shape in plan and back filled with sand so that the flame would not reach the posts. The visual result around the posts is that the gas reaching the end of the coarse material immediately goes upward creating a flowing arc of fire around the posts. This is seen as a blur in the photos.

The underlying coarse rock distributes the gas pretty evenly across the firebox floor creating a even matrix of small flames on the surface as it works its way up through the media. The extreme perimeter appears more active. There are more constant more steady flames from the mound. Because there is less gas at the perimeter, the gas there burns in horizontal spurts and appears like lightning bolts licking the edges of the firebox.

There are small vortexes of fire that form and sometimes work there way around the base of the mound on the center but usually preferring a particular area to hang out.

The overall effect is one of a dispersed flame. As if the entire bed of the fireplace is afire with a low blue flame. With all the lights out in the room it is quite magical. Not at all anything like a conventional yellow flame in the center. Due to the dispersion of the flame across the large firebox area, there is a lot of heat generated and dispersed into the room instead of up the flue. This is not a design for summer time nights.

Everyone who witnesses this flame is impressed with the “light show” quality of the burn.

In the future I plan to change out the media and experiment with different ways to direct the gas and resultant flame to achieve different effects.

Next time I am thinking of laying a pattern of coarse rock and infilling between the “arms” of coarse rock with sand so that the gas will follow the “arms” and come up in more predictable places, perhaps creating little vortexes or pyres at the ends of the “arms”.

Regards,

Keary Gregg

The pictures below are of:

Bronze, Dark Red Orange Topper, Gold, Amber Topping, Scarlet Red and Diamonds. The back of the fireplace was done with Ceramic tiles.Very nice and in Palm Springs.

The pictures below are of a log converted fireplace in Newport Beach now we can even produce tornadoes! This fireplace has Starfire, Diamonds and a few cool fire tornadoes! We can control the size and duration of these little fire devils!

Great party favors, huh?

The fireplace below is a vent less with a steel pan and a stainless face added to cover the controls. The glass is Azurlite with Ice Ice Ice. Ahhhhh the beauty of no logs! Really!

Can you honestly say logs look good?

The fireplace below is in Newport Beach California and Laura did a great self install!

2" of lava and a Bronze base with Bronze Reflective and 2 lbs of Gold. One can of paint and your done.

laura 5 laura 4

laura 6 laura 7

laura 3 laura 2

laura 1

The fireplace below has Starfire and Ice Ice Ice installed with a really cool ceramic tile on the face. Nice job!

The house below is in Cape Cod and has Starfire

Click on any of the pictures above to see the house in full detail and who built/ designed the house!!!

This one is sad, funny but true

A customer came in and asked how to convert her direct vent fireplace and we asked her to remove the logs, take a picture of the burner on and off with out the flash. We need to see the burn pattern and the type of burner we would be dealing with. She went home and asked her son to remote the logs so she could do this. Here we go!

oops 1 oops 2

oops 3 oops 4

oops 5

All her son heard was:

Logs, Fireplace, Out!

OOPS!

The fireplace below has Bronze, Bronze Reflective, Ice, Gold and Yellow Amber Topper. This fireplace is in Shawano, Wisconsin at the Cotton Patch Restaurant. E mail Patti and tell here you saw her fireplace.

Now for the after pictures! This was a custom propane burner which was under all of the glass!

This is what Patti had to say:

Hi Ed,

Well, it's been about two weeks since I installed the new fireplace, and it is the talk of this sleepy little town. Because of the "Ice" on the top, it has been nicknamed the "Fire and Ice" fireplace. I just placed an order for a pound each of 1/4" Gold, Yellow Amber Topper and Clear Ice. I think it needs a smidgen more color, and since the Ice is the big feature, I decided to add a little more. I have to say, I didn't think I would like the Ice, but it looks amazing!

Thank you Ed and Jimmy for all of your help and hand holding over the past few months. I will take more pictures when I add the new products.

Thanks again,

Patti

arnev@frontiernet.net

The fireplace below has Starfire, Bronze, Bronze Reflective, Gold, Amber and Dark Red Orange Topper.

The fireplace below has a 3" layer of crushed lava, 1/4" Clear base, 1/2" Starfire, 3/4" Starfire for the chunky look and a flush surround to finish it off. A very impressive and modern house and fireplace. From beginning to end, here we go.

n 1 n 2

We also floated the walls to level the fireplace and get it ready for the surround.

A little bit of granite on the floor

n 3 n 4

If you notice to the right there is no valve to turn it on? The plumber from a few years ago has it to the right about 5 feet, DUMMY! Lets fill the fireplace with gas before we get there and see what happens! Don't hire that plumber.

n 1 n 2

We are now going to do an extended 3/4" glass radius counter in the kitchen in front of the stove for a glass counter top.

n 3 n 4

n 5 n 6

We also bent all of the kitchen handles to contour the cabinets.

n 7 n 8

n 9 n 10

n 11 n 12

n 13 n 14

n 15 n 16

n 17 n 18

n 19 n 20

Now you can see the fireplace valve to the right.

n 21 n 22

We flush fit a surround to the wall for a final finish. This was a satin black aluminum frame with 2" of glass installed

n 23 n 24

We are capable of any size project from design to a full installation (depending on our current work load). There is nothing we can't do as we are the the first and foremost authority in our field. We never say NO! We do only what the other companies can only dream about!

The fireplace below is a propane burner, self installation with the 2" method, Starfire and Gold on top

jr 1 jr 3

Above we have the old burner with a smaller flame pattern which we will change to a double burner in our tray propane pan burner

jr 5 jr 4

A little bit of cleaning with a wire brush and 1200 degree paint

jr 6 jr 7

We filled the bottom with pea gravel and the covered it with sand

jr 8 jr 9

Then we installed the propane burner and filler it with pea gravel to the top of the burners

jr 10 jr 11

You can see the pilot light and thermo-coupler exposed

jr 12 jr 13

So there it is. A clean burning propane burner, 2" method, no soot, no smells, no carbon monoxide and it puts out a tremendous amount of heat. We sell the 2" method because it works and if anyone tries to tell you different, they need your money more than you do. We are the only company building propane burners for glass that don't soot or smell!

The fireplace below has Bronze, Bronze Reflective , Ice Ice Ice and Clear Diamonds

The Fire pit/ Fireplace is in the entry, pretty cool.

The fire pit below has a Clear base, and 3 lbs of each of the following, Starfire, Azurlite Reflective, 1/2" Bronze, 1/4 Bronze, Evergreen Reflective, Gold, Black Reflective.

The project below has Pink Rosa, Azurlite, Starfire, Black, Neo Lavender Shift, Red, Amber and Evergreen Reflective. This is now a window in Palm Springs and produced by Dan Tipton, eatdrttipton@earthlink.net tell him what you think.

This is our latest venture and the first ones will be installed in a month or so. We will be posting pictures of the completed project. These are very futuristic Tiki Torches if that's what you would like to call them, enjoy.

swirl 1 swirl 2

swirl 3 swirl 4

swirl 5 swirl 6

swirl 7 This last one looks like Wilma Flintstone?

What we have done is create a vortex and added fire! These will be made available in all sizes, colors and shapes. Stay tuned for more installation pictures!

Here is our first project in our metal shop. A portable fire pit for propane or natural gas. These will be available in unfinished (as shown) just add your stone, plaster, marble, granite, brushed stainless steel or? The fire pit shown is a natural gas with multi mix glass (about 30 to 40 colors from our mixing counter. We are building our first 50 this month. The size is a 30" x 30" x 18" tall.

Our newest line of burners are the star burners available in 12", 18" 24" and 30" in stainless steel and steel

30" star

24" star

12" star

These are also made in custom sizes as well. If you dream it, we can make it! These can be made with a base or with out. The can be made for propane or natural gas.

The Sticks below are a pro-to type of 2 sets that are being installed in Nipomo California in the Trilogy project by Shea Homes (Pismo Beach). We will follow up with completed pictures as soon as we have time to post the finished project. There are several fireplaces which will also be all electronic ignition as well

At the base of each burner there is a control valve to regulate the flow of fuel to the burner. The base will be covered with our black sand to conceal the valves. We will post pictures of the finished and completed project.

This fire pit was sent to us to convert to a propane burner and we found broken bottle glass in the fire pit. You be the judge. Please look at out Toppers and Toppings page and you will see we don't use trash glass, really! We are updating most if not all of our pictures of our products to show you what you are getting. There will be no surprises when you purchase our glass. Remember you get what you pay for and Imitation is the highest form of flattery! These companies must be in love with us!

This is not our glass! This is what we call recycled glass, trash!

The fire pit below has had a few problems with soot but we were able to fix it's issues. Propane can be a problem if you don't pay attention. You don't need money as it cost nothing to pay attention!

You will pay if you don't get the correct burner, if you don't burn the glass to bad it can be cleaned. There are a few rules when you are burning propane and you must follow them or your pictures will be here as well.

soot 1 soot 2

It doesn't start too bad.

soot 3 soot 4

soot 5 soot 6

In a few hours it goes from bad to worst!

soot 7

We can fix any problem or issue provided you are willing.

These are our round ring burners with out the center hub and these can be made in any size in steel or stainless steel

10 inch 1 10 inch 2

10 inch 3

The pan below is a brushed aluminum pan with sculpted legs. This pan is for propane and now we offer a simple adapter to convert this to remote control from the back side (battery operated). The glass installed is a multi mix for the photo shoot only. The pan is 2" with 3" legs. This pan will be installed in Cabo San Lucas, Mexico

alum 1 alum 2

alum 3 alum 4

alum 5 alum 6

alum 7 alum 8

alum 9 alum 10

alum 11 alum 12

alum 13 alum 14

The half round burners below were installed at the Marriott "Gas Lamp" San Diego, California in a 72" Fire pit. We will post pictures of the finished project when we get the pictures sent to us. These were 24" x 48" stainless steel half round burners.

half 1 half 2

half 3 half 4

half 5

The burner below was designed for a customer that wanted something different!

cross 1 cross 2

cross 3 cross 4

cross 5 cross 6

cross 7 cross 8

The fire pit below shows our FPPK (fire pit propane kit) a 30" base with a double 24" stainless steel burner. You will notice the igniter and thermo coupler (heat switch for safety). The base plate is to prevent propane from leaking into the fire pit below.

bm 1 bm 2

bm 3

The propane conversion was here in Southern California. Crista brought the bowl and we did the rest.

crista 5 crista 6

Crista brought the top pan and lid and we installed a propane burner We installed one of our FPPK kits (fire pit propane kit)

crista 2 crista 3

crista 1 cb 7

This is the table Crista built to hold the copper pan/ bowl

cb 1 cb 2

This is a self install with a clear base, lagoon topper, pale emerald green topper and ice

above the burner goes in

below the lava goes on the burner. Then magically the lava disappears! We use the 2" method to save money not gouge the customer as we here this everyday how customers are taken by BS!

The fireplace below is in San Diego, California and the colors used were:

Cobalt Blue Topper

Steel Blue Topper

Cranberry Pink Topping

Purple Topper

Lilac Topper

Deep Royal Topping

Clear Base

Solex and Solex Reflective

Azurlite and Azurlite Reflective

Blue Green and Blue Green Reflective

and a little bit of Ice Ice Ice on top

wow!

The end pictures show that the burner was too close the wall which was an easy fix by moving the burner forward.

This is where is went a little bit wrong, oops. We just had them move the burner forward and now its fine and the back wall was repainted.

The vent less burner below is 1 of 3 that were sent to Georgia. The glass that we tested was multi mix. We show the burner finished, with the burners exposed, burning and with glass, We will post the pictures of the finished fireplace when the customer send them to us to post. This is a propane vent less burner and these also are made in natural gas as well.

Notice the stainless box tray underneath the upper pan.

If you dream it, design it, think of it, we can build it as we are the innovators in the industry which seem to some how give licence for most to try to copy us and our products and designs. What is important that you know who we are!

The fire pit below will be aired in early of 2008. The fire pit was filmed by Yard Crashers (www.IdeaFactory.tv ) in Sacramento, California. A subsidiary of HGTV and Pie Town Productions. We will post air times as soon as we have them. But for now here are a few shots from the filming. Yard Crashers is a new program from HGTV who do complete makeovers in your back yard. Please contact www.IdeaFactory.tv for details on how you can get involved!

yc 1 yc 2

yc 3 yc 4

yc 5 yc 6

yc 7




	HOME

	ABOUT US

	PROGRAMMING

	BROADBAND

	CONTACT US

	CLIENT ACCESS

The surround below is a 3 sided surround with a 2" frame and 2" of glass and we will post the completed pictures in a few days. We installed this in Palm Springs California.

cindra 4 cindra 3

cindra 2 cindra 1

The pictures above are of the surround before installation. The fireplace pictures below are of the completerd fireplace surround installed with clear base glass

cindra 5a cindra 6

cindra 7 cindra 8

cindra 9 cindra 10

cindra 11 cindra 12

cindra 13 cindra 14

cindra 15 cindra 16

cindra 17 cindra 18

cindra 19 cindra 20

The vent less burner below is made of steel and there were actually 4 of these made. We covered the front and sides with 5" skirts. There are being installed in Georgia and as soon as they send pictures we will post them These pictures were taken just after the testing. This is a propane vent less burner and these are availabe in natural gas as well.

The pictures below are of the same burner as above with Azurlite installed. These 4 vent less burners are being installed in Georgia.

The skirts will hide the the valves and the remote control will be moved to the side of the fireplace. This was a vent less burner the customer sent to us for conversion and they asked for us to add a remote to all 4 vent less burners.

The fireplace below has a bed of bronze with amber, yellow amber and dark red orange. The FireShapes finished it off.

One of our newest inventions and products is this Vortex Fire

A little bit like a Tasmanian Devil on fire in a box!

Our first public showing was in Palm Springs at the Village Fest Art Fair in August of 2007

Here are a few pictures of the Vortex Fire in public with one of our show trailers. These Trailers are being built for dealerships. We were showing 2 fire pits outdoors, the Vortex Fire and our fireplace indoors.

This was the first public pro-to type which stood 36" tall. We are building 14 = 36" Vortex Fires for a party in Hawaii and we were contracted to build 32 Vortex Fires as large as 96" and as small as 48" for a Night Club/ Bar/ Restaurant in Las Vegas of we can't say at this time. But as soon as it opens we can post the pictures and let you know who it is. The first showing was a great success!

Send us your opinions of our trailer and the Vortex Fire.

Visit Our Original
E-STORE

Or Visit Our NEW
E-STORE!

Lantern VortexED (moderustic.com)

NEW PRODUCT

Some of Ed's project cars For Sale

INVESTOR PAGE

We Make Fire Cool!

Moderustic® is proud to have been issued 5 U.S. Patent Numbers
and 1 Patent pending status! 5th one just awarded notice of allowance 10/23/2021
Covering our method of creating tumbled tempered glass for use in fireplaces and fire pits.
Patent Applications Published 2005, 2006, 2014 and 2017 (twice). Worlds most infringed PATENT in WORLD HISTORY!

Safe FIREGlass for Fire Pits and Fireplaces

A must see and read!

Our Glass is SAFE and See Why!

We Appreciate Your Comments & Feed Back. Please
Send Your E-mails or Click HERE to Submit a Survey!

Note* When calling for any technical support we ABSOLUTELY
require Digital photos from a camera not your phone.

(909) 989-6129 Fax: 909 944 3811
or E-mail us at
Ed@Moderustic.com | Jaunzemis@msn.com

Need to know how much you need "HOW MUCH DO I NEED PAGE"	Our Crushed Lava can be purchased online "JUST CLICK HERE"
Do you need a Burner? "JUST CLICK HERE"	Our Fireplace Paint can be purchased online "JUST CLICK HERE"

Click "HERE" to see our Carbon Monoxide Report.

Investment and Partner Opportunities

Stop by and visit our Showroom in Rancho Cucamonga:(just north of the Ontario Airport
Moderustic Inc.
9467 Ninth Street Suite #D
Rancho Cucamonga, California 91730
Hours: Monday-Friday 9:00 to 6:00 Closed Saturday and Sunday, Saturday by appointment only.

If you're coming late, please call us and we will stay late. We are 2 miles North of the Ontario Airport
_________________________________________________________________
Moderustic Fabrication University

"CLICK HERE" or on the Picture below

Investment, Employee or Career Opportunities.
_________________________________________________________________

We Make Fire Cool!

Simple Patents (click here)

RETURN POLICY!

Shipping has become an issue so all orders will and must be signed for. No package will be left at your door unless you sign for it. This is called an indirect or direct signature request. It is also refereed to as a Signature service. If a package or packages are left at your door per your request, you will be the responsible party.
All returns must be made within 30 days of purchase with exceptions only by management
Returned products must be unused and/or unmixed
Returned products must be packaged well to avoid damage in transit, or you will be responsible for the damage
Returned products that are damaged in transit will not be able to be refunded
Refunds will be made towards product cost only
Refunds will not be given for non-product labor costs (consulting fees, installation fees, labor, shipping etc.)
Restock fees may apply depending on which items are being returned. (30% to 70%) Glass/ burning products 30%, Burners 50%, Custom Burners 70%, Metal Pans or any Custom Metal Work, Electronics are not returnable ever!

All returns must have a return authorization (we are not responsible for products being shipped to incorrect addresses due to non-compliance of this policy)
No returns or exchanges will be accepted for any custom metal products or electronics what so ever!
No returns will be accepted for ICS/ Fire Falls, or any other standard or custom fire pits.
No returns on products that contain electronics (if they were used or installed)
We are not responsible for local codes and or if any of our products are or are not approved. Please check with your local building department or governing agencies for proper approvals before purchasing. Custom built or designed items are not returnable for any reason. It is your responsibility to make sure our products do not violate your local building codes. We cannot accept returns should you encounter these issues with your local building authorities.
Any Designs, Drawings, PDF Files, Ideas, Pictures, Attachments, Renderings, Facsimiles, Faxes, Blue Prints, Copies, Documents and even copy written materials once sent to Moderustic Inc, Ed Jaunzemis, Aquatic Glassel or any employee of Moderustic Inc becomes property of said company to use, distribute, copy, reproduce, manipulate, recreate, modify, advertise, promote, lay claim to and or use in our discretion as we need. If you do not agree with these terms then please do not send us anything. Our intentions are to create for you the "Customer" and it is our vast collection of material that will spawn an idea for you to have us create something for you. If we should create something/ anything for you that is one of a kind, you do not own any rights to this or there idea or ideas, product or concept in any way shape or form.

To read all company policies, terms and conditions, CLICK HERE!

Propane Prop 65 Warnings

All of the pictures and content are copyright protected on this website: U.S. Copyright Registration No is: VA 1-650-624
Entitled: "Moderustic 1107"
Effective registration date is February 1, 2008.
Has anyone ever told you "Nice Logs" ? Nooo, I don't think so.
CSLB# C-17 693887

US patent numbers #US9700987B1 and US9808905B2

We Make Fire Cool!

Violators will be prosecuted.

Note* When calling for any technical support we ABSOLUTELY (maybe)
require Digital photos from a camera not your phone (if that is all you have, then that's fine).

(909) 989-6129 Fax: 909 944 3811
or E-mail us at
Ed@Moderustic.com | Jaunzemis@msn.com

_________________________________________________

Click HERE or on the Picture below to see our MOVIES!

Click HERE or on the Picture above to see our MOVIES!
_________________________________________________________________

Check out the Car Garden, A fun car page by Ed

We now have "several" Active Patents and a Patent Pending Status. "We were the first to file" (yes we were), is why we have The Patents for FireGlass.

Prop 65 Warning:

WARNING: This product can expose you to chemicals including Lead and Lead Compounds, which are known to the state of California to cause cancer, and Carbon Monoxide, Lead and Lead Compounds which are known to the state of Califronia to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
ADVERTENCIA: Este producto puede exponerlo a productos químicos como el plomo y los compuestos de plomo, sabidos por el estado de California como causa de cáncer, y el monóxido de carbono, el plomo y los compuestos de plomo, sabidos por el estado de Califronia como causa de defectos de nacimiento u otros daños reproductivos. Para obtener más información www.P65Warnings.ca.gov.

For any competitors out there, Second place is first loser. Sorry.

See our page for Investors!

Safe FIREGlass for Fire Pits and Fireplaces

A must see and read!

Patent Piracy is not a victimless crime

US active patent numbers US9700987B1 and US9808905B2

5 Patents and patent pending

Visit www.USPTO.GOV for details on Patent infringement

or E-mail us at
Ed@Moderustic.com | Jaunzemis@msn.com