FireGlass , fire glass, fire glass, fireplace, fire pit, modern fireplaces fire pits, https://www.moderustic.com
Moderustic Aquatic Glassel Fireplace Glass Rocks Propane FireplacesModerustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces

Ed@Moderustic.com 909 989 6129

Azurlite Base Glass

1/4 azurlite 1

1/4 azurlite 2

14 azurlite 3
14 azurlite 2
The fire pit below has Azurlite Base Glass, 1/2" Azurlite Base Glass, Ice Ice Ice Topper, Starfire Base Glass and Platinum Base Glass in the center. Lava rock was used to minimize on the use of glass to keep it in the budget.
fire pit 1
fire pit 2
fire pit 3




For the pictures below, read on.

Hi Ed,

I finally managed to finish the fireplace.  We have decided to place a 2" piece of metal in front (which hasn't been done yet), though, to keep the glass off the ledge.  We thought it would be deep enough, but that didn't quite work.

To enable me to keep the center area smooth, we had to place the burner on top of the wall pipe, which created a rather high burner placement.  This ended up creating a bit of a problem because I had a steep slope to the hearth.  This is why I need to add the metal strip in front--so the glass doesn't roll down and come out of the fireplace.  We had decided to not have a glass door on it, although if we find something we really like, that could change.

 The pics might come in 2-3 e-mails, but I'll describe them here.  The first few pics are duplicates of ones I already sent you.

1. Original fireplace, emptied out.

2-3. After painting with the dark blue from the chart you guys gave us.  The wall was painted to match, although, I'm not sure I really like it.  I'm trying to reserve judgement until I see it for awhile.

The damper handle is a brass duck head which wasn't even noticeable when it was all black.

4-5.New burner in place.  This created more problems than expected due to the wall pipe being higher than most.  We ended up using regular lava rock, since we couldn't find the smaller rocks.  Then we added small pea gravel to fill in gaps around the lava rock.  After the burner was finally level, we added the sand.

6. Testing the burner with sand added.

7. Clear Base Glass added.

8. Rest of colors were added--Starfire Base Glass, Azurlite Base Glass, Cranberry-Pink Topping, with a little Steel Blue Topper and a few Ice Cubes.

9-10.  All finished and burning.

We're still working on the right side of this wall which has cabinets holding the TV and storage.  Once the entire wall is finished, I'll send you one final pic of the entire wall.  Not sure how soon that will happen, so don't wait for it, if you want to post these pics on your website.

I want to thank you for all your help.  Your store was great to visit, so we could pick our glass out in person.  Your staff was very helpful and we had a great time making our final color choices. I'll will definitely recommend you to others.
 

Senior Instructor for Art Clay  PMC Certified crafterjudi@yahoo.com email any comments or questions to Judi


judi 1judi 2
judi 3judi 4
judi 5judi 6
judi 7judi 8
judi 9judi 10


CLICK HERE TO PURCHASE IN THE E-STORE!

The fire pit below is a failed attempt of a propane conversion without our help in the beginning. You can't just burn propane! If you try this, this is what it will look like. You need to calibrate the amount of air to propane or it will back fire, burn black or explode! We recommend a thermocouple, air mixer/ venturi along with several other important factors. We won't tell you who tried this but we will tell you we did fix the issue and now the customer is very happy. We did use Azurlite Base Glass with Azurlite Reflective Base Glass.
stan 1stan 2
stan 3stan 4
stan 5stan 6
stan 7stan 8
stan 9stan 11
stan 12stan 13



The fire pits below are located in Laguna Beach California at the Cliff Restaurant
5775 South Coast Highway Laguna Beach 92651
We used a Clear Base Glass with Azurlite Base Glass on top with Azurlite Reflective Base Glass. Then we added Emerald Green Topper and Copper Blue Topper which turns green when it gets hot. Then it turns back. Because the chrome is seen when its cold and the copper changes the color to green when it get 500 degrees.
cliff 7
cliff 8
cliff 9
cliff 10
cliff 11
cliff 12
cliff 1
cliff 2
cliff 3
cliff 4
cliff 5 cliff 6

CLICK HERE TO PURCHASE IN THE E-STORE!
on top. Then Topped with Pale Lime Green Topper and Aqua Marine Topper.
table 1
table 2


The fireplace below has Evergreen Base Glass and Evergreen Reflective Base Glass, Emerald Green Topper, Pink Rosa Base Glass, Azurlite Base Glass, Cobalt Blue Topper, Olive Green Topper, Green Diamonds and Blue Tubes Toppers. They had use their existing pan burner which was a double burner and worked out just fine.c 01c 3 c 1


The fire pit below has a Azurlite Base Glass with Aquamarine Blue Topper, Hyacinth Topper, Citrine Topper and Copper Ruby Red Topper. This is a propane fire pit in Texas. Our dealer installed this glass and explained to the customer to eliminate the soot from the propane we had to lean the mixture with air. The customer asked the burner manufacture to come out and inspect the fire pit. The manufacture told the customer the glass was defective and this was causing the soot. The manufacture didn't even know how to get a clean burn on their own product! Needless to say the fire pit is still producing clouds of soot and the customer now knows the manufacture didn't even have a clue. The smell in propane is an added oil to the liquid propane so it can be identified. The oil will still burn off as the fuel is used but we lean the fuel by introducing 6 parts of air to the fuel to virtually eliminate the soot from the fire. Below are before and after pictures of the propane fire pit.
pit 1
pit 2
As you can see below the fire pit was creating soot long before we even started. The glass had nothing to do with burner as the burner was in the middle of the glass. The manufactures of most of these propane fire pit and fireplace burners don't even have a clue on what they are doing so please be careful. In this case the manufacture didn't know how to get a clean burn so there fore he said it can't be done! You be the judge, what looks better?
pit 3
pit 4
pit 5
pit 6


The fire pit below is in Palm Springs and the customer poured about 350 lbs of lava and we topped it with 80 lbs of our 1/4" crushed lava to keep the glass from falling through the larger lava rock. We used a 50" stainless steel "H" burner and topped that with 120 lbs of Azurlite Base Glass.
palm springs 12
palm springs 13
palm springs 14
They left about 3" to 4" of the interior glass tile showing, very nice effect.
palm springs 15


CLICK HERE TO PURCHASE IN THE E-STORE!

The fireplace below has a 3/8" Starfire Base Glass with 1/4" Azurlite Base Glass, Citrine Topper, Hyacinth Topper, Lagoon Topper, and 1/4" Platinum Base Glass laminated to the back wall. This was installed in Dallas Texas by Nadine.

nadine 2


The fire pit below is again in Dallas Texas and installed by Nadine. She used a Black Base Glass with Gray Base Glass, Gold Base Glass, Bronze Rust Copper Base Glass and a splash of Azurlite Base Glass.
nadine 3


The fireplace below is an electric fireplace. Actually we have supplied glass to dozens of electric fireplaces but Rita was the only one who sent us pictures of Azurlite Base Glass under her logs. There is no real fire but it does look nice.
rita 1
rita 3


The fireplace below has Azurlite Base Glass with Dark Red Orange Topper and Yellow Amber Topper on top.
susan 1




The fireplace below is in Palm Springs, California and is a self install
ps azurlite 1
Clean and paint the walls in the color of your choice, we offer 25 colors!
ps azurlite 2
Screw on the flex line adapter
ps azurlite 3
Attach the flex line and burner with the flex line under the burner.
ps azurlite 4
Test the burner to insure the flames are not hitting the back wall.
ps azurlite 5
Pour on the glass, with or with out filler (sand or crushed lava rock)
ps azurlite 6
ps azurlite 7
and you're done!
ps azurlite 8
ps azurlite 9
ps azurlite 10


The fireplace below was installed by George Foote who also built his own pan, great job! We supplied the burners and glass and George supplied the talent and labor. Great job George! The colors used were:
and our Ice Ice Ice Topper and you be the judge!
Before the pan and glass.

george 1
Here is the stainless steel pan that George built.
george 2
george 3
george 4
george 5
and the rest of the colors for one nice design from George!
george 6
george 7
george 8
george 9
The fire pit below is filled with lava rock and then was topped with a base of Clear Base Glass. Then they covered the Clear Base Glass with Azurlite Base Glass and topped it with a few Ice Ice Ice topper cubes. A funny story comes with this fire pit. Elliott came out from the San Fernando Valley as he was sent by his mother, which was tooooo busy to come out herself. She told Elliott to pick out the colors he liked which he did (he was told to pick amber colors). He went home with Amber Base Glass and Gold Base Glass and set up the fire pit which actually looked very nice. Well to his demise his mother did not like Amber at all! She made Elliott pick out all of the Amber and replace it with what you see here. Yes we did exchange the glass for him to prevent his mother from further punishing Elliott. We will post the Amber Base Glass pictures when we come across them in our files.
elliott 6
elliott 8
elliott 1
elliott 2
elliott 3
elliott 4
Elliott: It turned out very nice! I hope your Mother is happy now.
elliott 5


The fire pit below has a Azurlite Base Glass and a black granite ring for one very nice fire pit!
sam 1
sam 2
sam 3


 
On this page (as if you needed another page) We are going to show you how to build a basic fire pit for your deck/ back yard.
This was built by Glenn Harvey of British Columbia.
This first picture is the frame he had started with.
You can make one from metal studs, aluminum studs, etc. Anything non flammable.
GlennHarvey 1
Wrap it with wonder board or durock/ cement board.
GlennHarvey 2
Below you can also wrap it with wire for better adhesion to the backer board.
GlennHarvey 4
This fire pit was natural gas. We also manufacture the burners for propane. Well, we are the only ones who actually manufacture propane burners for your projects.
Below you can see the gas connection coming up from the deck. Glenn used a pan but he also could of used an aluminum/ stainless steel base plate as well. 
GlennHarvey 3
The stacker stone is now being applied.
GlennHarvey 5
As you can see below the trimming valve is installed on the side. You would be surprised on how many plumbers don't think of this little detail, a valve to turn it on or off. I have seen the valves installed inside of the pit or not even at all. You also need to be careful as to not have a gas line installed that is too small for the application.
GlennHarvey 8
Now the stone and cap are done, great and simple job!
GlennHarvey 6
GlennHarvey 7
Below you an see the larger filler lava rock was installed.  If a flat plate were to have been used you wouldn't need the larger filler lava rock base.
GlennHarvey 9
Below our crushed lava was used to cover the larger lava rock to insure the glass does not fall through. This makes an even base. What ever shape you make the lava is the shape the glass will take.
GlennHarvey 10
Below we installed Water White Base Glass (32 lbs) for a 1 1/2" cover! 
GlennHarvey 11
The stone on the side of the fire pit used was to match the stone on the house as well. Looks awesome!
GlennHarvey 12
Below is just the Water White Base Glass before the colors were added.
GlennHarvey 13
The colors that were added are as follows:
Scarlett G072F3 Topping for the suns rays
Orange R140F4 Topper for the ring around the suns center
Emerald Green 1417 Topping  for the bottom trees/ grass?
Deep Blue 2507 Topper mixed in around the Azurlite Base Glass in the sky area.
GlennHarvey 14
If you notice below the center of the sun, it changes when it get hot! This one of our chameleons  that change when the glass gets hot. If you look real close at the Orange Topper (next to the suns center) as well, it turns a bright cinnamon red when it get hot also! All of our chameleons will be posted when we get a chance. This is just another one of our product lines that we have not had time to further promote.
GlennHarvey 15
Above is the fire burning and
below the fire was just turned off.
Glenn spent a few hours placing all of the glass to make this very cool scene. So don't just think you can just throw it on and it knows were to go. Very creative!
GlennHarvey 16




                                                       The fire pit below belongs to Chad Haupert. He used an Azurlite Base Glass with Azurlite Reflective Base Glass on top. Then he created a star in the center using Bronze Rust Copper Base Glass with and outline of Ice Ice Ice Topper. We didn't get pictures of the complete pit nor of it burning. But it looks great!
CHAD HAUPERT 1
CHAD HAUPERT 2
CHAD HAUPERT 3



The fire pit below is in Palm Springs California. We use Azurlite Base Glass Fireplace Glass and a crushed lava filler underneath. There were a few issues which we resolved.
First issue: Don't use polished Mexican Pebbles as they will chase you across the  yard.
Palm Springs 1
Palm Springs 2
Above, second issue, the ring could of been bigger as we installed a triple 30" stainless steel rind.
Below, third issue the plumber installed a 3/8" reducer, why? :-~ The gas comes is with 1/2", the ring is 1/2" so the plumber installed a 3/8" reducer in between the gas supply and the ring. Why in the heck would he do this? Anyway we just installed a 1/2" flex line and the pressure was back and fine.
Palm Springs 3
Palm Springs 4
Cover the wrong material with at least 1 1/2" to 2" of crushed lava.
Palm Springs 5
Palm Springs 6
And pour the Azurlite Base Glass Fire Pit Glass
Palm Springs 8
Palm Springs 10
Palm Springs 11
We never were sent pictures of the fire pit burning, but we did test it during our installation.
Palm Springs 12

CLICK HERE TO PURCHASE IN THE E-STORE!

                                                                
The fireplace below is in Palm Springs and was installed by John, our customer.
He used a sand base with 1/2" Azurlite Base Glass on top.
John 4
John 3
John 2




CLICK HERE TO PURCHASE IN THE E-STORE!

                                                                  
 The fire pit below is a mix of V Blue Base Glass and Azurlite Base Glass.
Gary Janz 1
Gary Janz 2
Gary Janz 3
Gary Janz 4

The fire pit below was purchased locally and then we converted it to burn propane without soot! The colors used were:
Starfire Base Glass,
and topped with 1 lb of Copper Ruby Red Topper. I guess he wanted a lot of color.
James 2
Here is what is looked like when he started. These manufactures have no imagination!
James 3
James 4
This only cost about $100.00, complete!
James 1


The fireplace below has Azurlite Base Glass, Ice Ice Ice Topper and Sky Blue Diamonds for accents.

Johnny 2

Johnny 1

 

The fire pit below was installed in Sydney, Australia by Ian Sutherland. He did a great job on his new patio and fire pit. We inspired him to build this really nice back yard project and we were glad to help. The glass that was used was Azurlite Base Glass and Starfire Base Glass.

Australia 11
Australia 11
Australia 10
Australia 8
Australia 6
Australia 5
Australia 3
Australia 2
Australia 1


              John Kirkhan below started with a Starfire Base Glass and added: and Ice Ice Ice Topper
John Kirkhan 1




The fire pit below has Azurlite Base Glass FireGlass/ Fire Glass installed. This fire pit was to have an electronic ignition but the pool builder forgot to wire it, oops! We then installed a battery operated IPI system and we will explain as we move on. The first issue was we were told the pit was 8" deep, it was only 6" deep! That will explain why the glass is mounded so high. they put a board on top of the fire pit and measured it to the top not the bottom.
Ram Palm Desert fire pit  2
We had to mount the gas on top of the ring because of the measuring mistake.
Ram Palm Desert fire pit  4
On the bottom front left of the pictures you can see the blue battery compartment.
This will be just slightly covered with glass but easy to find come the time to replace the batteries.
Ram Palm Desert fire pit  5
First layer of glass going on.
Ram Palm Desert fire pit  6
Ram Palm Desert fire pit  7
Ram Palm Desert fire pit  8
Below you can see that the ignition is just above the surface and the battery box is now gone!
Ram Palm Desert fire pit  9
We had to add more glass, again because of the 6"/ 8" bad measuring.
Ram Palm Desert fire pit  10
Ram Palm Desert fire pit  11
Below here it is finished.
Ram Palm Desert fire pit  13
Yes it is on the golf course in Palm Desert
Ram Palm Desert fire pit  14
Ram Palm Desert fire pit  15
Ram Palm Desert fire pit  18
Below we did a Paparazzi photo shoot! This home took 2 years to build! The gates below had Sea Glass laminated to the glass panels.
Ram Palm Desert fire pit  21
If you take notice to the outside walls, the entire house was covered in marble! Crown moldings included!
Ram Palm Desert fire pit  22
Ram Palm Desert fire pit  22
Ram Palm Desert fire pit  23
Ram Palm Desert fire pit  24
Ram Palm Desert fire pit  25
Ram Palm Desert fire pit  26
We only do this once in a while, but the home was outstanding. You should of seen the interior!
Ram Palm Desert fire pit  27




CLICK HERE TO PURCHASE IN THE E-STORE!
The fireplace below is in Palm Springs California. We installed a sand base, topped it with 1/4" Azurlite Base Glass and then covered it with 1/8" Azurlite Base Glass for a very refined look.
Palm Springs Azurlite 2
Palm Springs Azurlite 5
Palm Springs Azurlite 7
Palm Springs Azurlite 8
Palm Springs Azurlite 9
Palm Springs Azurlite 10
Palm Springs Azurlite 11


The portable fire table/ pit below was built by Kris Day. This is a portable Propane Fire Pit and he installed Azurlite Base Glass. This is a fairly simple project that we can help you build by monitoring and supplying the correct parts. From the start here we go:

Kris Day Fire Table 10

Kris Day Fire Table 11

Kris Day Fire Table 9

From start to finish, propane or natural gas burners with or without a pan, we can help you build your own.

Kris Day Fire Table 8

Kris Day Fire Table 7

Kris Day Fire Table 6

Kris Day Fire Table 5




CLICK HERE TO PURCHASE IN THE E-STORE!

                                                         

The next fireplace has quit a mix! Fred

 Pollakov decided on these colors:

Starfire Base Glass,

Bronze Rust Copper Base Glass mixed in,

Gold Reflective Base Glass,

Azurlite Base Glass,

Cobalt Blue Diamonds,

Amber Diamonds,

Periwinkle Cubes

The fireplace looks outstanding! There is a glass sculpture in the center which and is amazing!

Fred Pollakov 5

Fred Pollakov 4

Fred Pollakov 3

Notice the 3" tall 1/2" thick front screen at the bottom! Pretty amazing!

Fred Pollakov 2

Fred Pollakov 1





____________________________________________________________________________

 The table below was a typical plastic wicker patio table. We converted it to burn propane (safely) for Fariba in Santa Monica. You tell us how we did!
Fariba

A removable and replaceable top!
Fariba
Fariba
The glass we used was Azurlite Base Glass and Ford Blue Base Glass
Fariba
Fariba

You provide a table, idea, or you want to help, yes we can help
Fariba
Fariba

_________________________________________________________________________________


Jasmine Bals Surround (Free Form)

Click "HERE" or on the picture to see the installation

Jasmine Bals Fireplace Surround

Ed@Moderustic.com 909-989-6129

9467 9th street Unit D

Rancho Cucamongs, California 91730

 

Our Glass is SAFE and See Why!

Safe Glass
 We  Appreciate Your Comments & Feed Back. Please
Send Your E-mails or Click HERE to Submit a Survey!



909-989-6129  Fax: 909-944-3811 
or E-mail us at
Ed@Moderustic.com |  Jaunzemis@msn.com  

Ed@Moderustic.com 909-989-6129

9467 9th street Unit D

Rancho Cucamongs, California 91730


 
Moderustic Aquatic Glassel Fireplace Glass Rocks Propane Fireplaces